Mercado Node 3 - Completed Relay
Posted March 4th, 2005 by mikemee
A view of the completed Netgate 802.11a relay. From top to bottom is the base of the 802.11b downtilt omni, then an 802.11a panel antenna which terminate in the right and left site top N bulkhead connectors respectively. The silver box contains the WRAP 2C board with a 200mW Senao 802.11b radio card and a CM9 Atheros-based a/b/g card running in 802.11a mode. At the bottom, the white cable is an outdoor rated ethernet Cat-5 cable which provides power. It and the gold grounding wire go back through the grey conduit to a ground level utility cabinet.